Live stream from anywhere
at 100 Mbps without costly hardware.
Personalized support included.

live streaming

Unbreakable
connectivity
for flawless

Free shipping

30 days

30 days money-back garantie
period. You can try it with
no worries.

Free shipping nationwide.
We deliver MR.Net Plus
streaming kits for free.

/mo
$120
From
Trusted by
VP of Video Production
Super League
Director, Strategic Partnership
Mobile Video Devices
Brian Gramo
Derek Ball
Steven Lamphear
Testimonials
"Securing a reliable, redundant internet connection used to be complicated. Now it's a no brainer to have a MR•Net box for mission critical operations."
"We did successfully piloted with MR•Net due on the most recent Billie Eilish tour and we have great feedback so we are excited to begin deploying it on our stadium tour this summer."
"We quickly learned that the stable internet solution saved us a lot of headache and MR•Net saved us a lot of expense compared to what we would paid to obtainy internet that is typically far less reliable from the trade shows service providers."
live streaming scenario
Compatible with any streaming hardware, connects via LAN and/
or Wi-Fi (2.4Ghz/5Ghz)
Bonds 3 major carriers
together, and can bond
with your existing WAN/broadband
Constantly monitored
by our support team
resolving issues before
you see them
1
2
3
Perfectly fit to any
Unlike other
bonding solutions
We manage SIM cards,
connections, QoS remotely
and stay with you
whenever you stream
360° live
support
We pass you data charges
from carriers with zero
uplift cost - the more you use
the less you pay
No excess
data charges
Derived from 40 years
of our combined experience
in wireless media transmission
Video-focused
patented bonding
protocol
Free router - shipped with any plan
Supported carriers:
- Verizon, T-mobile, AT&T
Operating bands:
- LTE-FDD: B2, B4, B5, B12, B13, B14, B66, B71
- WCDMA: B2, B4, B5
Single LTE EC25-AF modem transmitter power by bands:
- WCDMA bands: 24dBm+1/-3dB (up to 0.32 W)
- LTE-FDD bands: 23dBm±2dB (up to 0.32 W)
Ethernet RJ45
- 2x 10/100 Ports
Operating conditions:
- Voltage: 12-23 V. - Power consumption: 18 W - Operating temperatures: 32-95° F - Air humidity: up to 80%
Weight & Dimensions
- Weight: 1.19 lbs + - Dimensions: 8 13/16 " wide x 1 9/16" tall x 6 1/2 deep (not including antennas)
Routing / Switching Protocols
- Pv4/IPv6, Static Routing, NAT, GRE, Port Routing, Port Forwarding
IP Applications
- DDNS, DNS Proxy, DHCP / DHCPv6
VLAN & VPN
- VLAN, IPSec, VPN Failover
Wi-Fi
- Wi-Fi Hotspot, Wi-Fi as additional gateway
Security
- Firewall, e2e encryption for each individual gateway
LTE,WAN,SAT
Aggregation of any
existing internet sources
2.4Ghz/5Ghz
Build-in Wi-Fi
(2.4GHz & 5GHz)
120 sec
Ready to go in less
than 2 minutes
Up to 100 Mbps upload
and download speed
100 Mbps
Bonding of 3 independent
LTE channels
3X reserve
Works up to 5 hours
with external battery*
5 hours
Technical specification
Supported carriers:
- Verizon, T-mobile, AT&T

Operating bands:
- LTE-FDD: B2, B4, B5, B12, B13, B14, B66, B71
- WCDMA: B2, B4, B5

Single LTE EC25-AF modem transmitter power by bands:
- WCDMA bands: 24dBm+1/-3dB (up to 0.32 W)
- LTE-FDD bands: 23dBm±2dB (up to 0.32 W)Ethernet RJ45
- 2x 10/100 Ports

Operating conditions:
- Voltage: 12-23 V
- Power consumption: 18 W
- Operating temperatures: 32-95° F
- Air humidity: up to 80%

Weight & Dimensions
- Weight: 1.19 lbs
- Dimensions: 8 13/16 " wide x 1 9/16" tall x 6 1/2 deep (not including antennas)

Routing / Switching Protocols
- Pv4/IPv6, Static Routing, NAT, GRE, Port Routing, Port Forwarding

IP Applications
- DDNS, DNS Proxy, DHCP / DHCPv6

VLAN & VPN
- VLAN, IPSec, VPN Failover

Wi-Fi
- Wi-Fi Hotspot, Wi-Fi as an additional gateway

Security
- Firewall, e2e encryption for each individual gateway
Manual
Please see the following instructions for setting up your MR•NET multi-router:

1) Unpack and find a place where you expect the cell signal in your location to be the best (usually by a window, up high, and/or where you have the most bars on your phone on-site).

2) Screw on all six antennas to the input ports on the back side of the MR•NET router and make sure they are aligned vertically (see picture).

3) Optional: Plug in any existing local broadband/satellite internet, etc, to the WAN port on the MR•NET router (via ethernet cable), and this signal will be automatically bonded together with the built-in LTE modems in the router.

4) Optional: Plug in any existing equipment (WiFi router or directly to your laptop/IoT device via ethernet) to the LAN port on the MR•NET router. Note: make sure the device connected to MR•NET via LAN is in DHCP mode. Static IP configuration is possible upon request.

5) Plug in the power supply to automatically turn on the unit (power button turns green). About 15-30 seconds later, you should see a separate blue light (located just beneath the main green power button) start blinking as the unit sets itself up, and then 1-2 minutes later you should see the light turn steady blue, which means your Internet connection is established and ready to roll!

6) Note: Your MR•NET unit has internal WiFi capabilities. We will send you the login info in a separate email. Once the blue light turns on and is steady, you will see the network appear and you can log in to that network, if you would prefer to use WiFi instead of ethernet out of the LAN port.

That's it! Please let us know if you have any questions!


Customer portal
- Professional settings
- SRT etc.
- SLA tracking
- Data Usage control
Live overview
99,99%
400+ Gb
300,000 audience
44 events
Select your plan
Monthly
$499
$199
Optimal
Ultimate
/mo
/mo
Access to monitoring platform
Free nationwide delivery
Unlimited data included
24/7 support
Private manager
No additional data fees
24/7 support
Access to monitoring platform
Free nationwide delivery
$7.68 per 1 Gb
$699
$249
Yearly
$399
$149
Optimal
Ultimate
/mo
/mo
Access to monitoring platform
Free nationwide delivery
Unlimited data included
24/7 support
Private manager
No additional data fees
24/7 support
Access to monitoring platform
Free nationwide delivery
$7.68 per 1 Gb
$699
$249
Click to order
Total: 
Your Name
Your Email
Your Phone
Still thinking?
2 GB test data - valued at up to $20
Up to 2 days hardware replacement
Flexible service suspension options for per-event use
FAQ
Do I have to pay for each sim card separately?
The supplied SIMs are free of monthly charge, and we only bill for data used at a single flat rate of $7.68 per gb. You will never be charged for data you did not use. You are also free to install however many of SIMs you source yourself at the rates you agree upon with the carrier directly. As long as the SIMs are hotspot sims, they will work in your MR•NET device.
Do you offer unlimited sims?
We can supply unlimited SIMs at $100 / month per carrier. This option is not recommended to MR•NET+ customers.
Does the unit come with a battery pack?
No, but it is compatible with most power banks that provide a 12-18V 1A+ output. We are happy to recommend compatible battery packs for use with MR•NET.
How can I tell how much data I'm using?
You can utilize our online portal or request a breakdown from support team.
How is this different from the hotspots I've already used in the past?
It is the best hotspot you have ever tried. MR•NET connects you to multiple networks at the same time, aggregating them into one fast, highly reliable channel. It is suitable to improve, or completely replace you current broadband solution.
Can MR•NET boxes connect to 5G networks?
The built-in wireless modules don't support 5G, but you can plug-in a 5G hotspot via WAN port. Let us know if you are interested in native 5G support and we will notify you as soon as it comes out!
Have any questions?
We are always ready to answer your questions and hope we could solve your case.
NEED HELP